Drilling Mud Diverter Service
This is a very demanding service where the mud can include entrained solids such as formation solids, shell, and shavings. Traditional valves expose their seats to this destructive media creating valve failures and costly repairs with long down times. The HCV valve's stationary core and protected seats has proven to provide an improved solution with installations on multiple continents.
|Size||6" ANSI 600 and 900 Class|
|Body Material||WCC Carbon Steel|
|Internals||Carbon steel - electrolysis nickel plated|
|Trim||Nylon seat/viton seals|
|Connections||Raised Face Flanged|
|Media||Drilling mud with entrained solids|
|Manual/Actuated||Pneumatic (Air/Open - Air/Close)|
|Temperature||Ambient to 200 degrees|
|Pressure||800 - 2000 psig|
6” HCV Valves were installed as drilling mud diverters – safety systems – on “under-balanced” drilling systems. Test units were initially installed in June 2008. Valves are mounted directly adjacent to the rotating head as primary dump valves in the event down-hole pressure surges to unacceptable levels. When the valves are required to operate they experience the high pressure surge along with all surging material (including mud and entrained solids including formation solids, shell, shavings, etc.) venting through the valve. When pressure stabilizes the valve is required to close and positively block the down-hole pressure.
The count on number of operations is difficult to determine as every drilling operation is unique. The valve design previously used in these applications exposed the seal surfaces to the media and in several cases, when operating (open to close) closed the sealing areas on the entrained solids, significantly damaging seats/seals requiring very expensive repairs.
Within the HCV Valve, the stationary core, maintaining its position protecting the seat surfaces, significantly minimizes potential damage to the seats. When damage is found the cost of repair is significantly less than the valve designs previously used as a result of the Cartridge concept and its ease of repair.
Since the initial installation of this test application and its successful results, Chromatic has supplied a significant number of these units operating in drilling systems on multiple continents.
The HCV valve (HEMI cartridge valve) is an innovative design that incorporates many positive features from other valve types. These features are combined into a single product platform that is UNIQUE to the Chromatic HCV product line and not found in any other valve on the market.The HCV is highly adaptive to a variety of process applications...Learn More