Molecular Sieve Dryer Switching Valve
Molecular Sieve Dryer
After extensive testing by the customer to well over 4000 cycles the engineer noted that the valves had no visible leakage. The customer immediately installed additional valves and has continued to replace other valves.
|Size||4" and 6" ANSI 300 Class|
|Body Material||WCC Carbon Steel|
|Internals||Carbon steel with electrolysis nickel plating|
|Trim||Teflon seat with Kalrez seals|
|Connections||Raised Face Flanged|
|Media||Nitrogen Dryer Switching Valve|
|Manual/Actuated||Actuated with override|
|Temperature||450F norm to 500F maximum|
|Cycle Frequency||Approximately 4 cycles per day|
The targeted valve installation is a molecular sieve dryer valve (also known as: mole sieve switching valve, de-hydration switching valve, gas de-hy switching valve, among others). Brief overview on molecular sieve dryer; a cyclical adsorption desorption system to transfer contaminants – or non-desired gas molecules from one stream to another. Mole sieve drying systems are utilized in processes where the end-user is ultimately trying to purify (remove moisture and contaminates or isolate specific gas strains).
- Natural Gas Processing - Removes CO2, H20, H2S, RSH, COS, Hg, S, etc.
- Petrochemical and Specialty Gas Manufacturing – Allows the separation of specific gas molecules (example methane for liquefaction)
- Regeneration done thermally with high temperature gas flow
Common application: valve cycles 4-6 times each day - year round. Pneumatically actuated. High temperature swings from ambient to 500°F (some as high as 620°F max). Potential Issues: On occasion, drying material is upset (desiccate) and is blown into valving during operation. This desiccate dust (material is as small as dust and as large as one inch in diameter) is extremely hard and has the tendency to crush in between the more commonly utilized valve design and damages the seating surfaces to the point that a positive seal cannot be achieved to isolate the dryer beds. Customer has to de-pressure entire system to repair in-line and they cannot repair themselves. Other designs require special tools. Multiple customers with this application complain about the accessibility/availability and cost of the certified repair technicians.
The first HCV Valve was shipped to this customer in February ‘09 and they independently tested to approximately 4100 cycles (estimated 4 years of service) on their site. The valve was noted in the engineer’s report to have “no visible leakage” after the test period. After the successful test, the customer immediately installed four additional HCV Valves in their next outage in June 2009. They have subsequently ordered additional valves to replace other valves around their dryer beds.
The HCV valve (HEMI cartridge valve) is an innovative design that incorporates many positive features from other valve types. These features are combined into a single product platform that is UNIQUE to the Chromatic HCV product line and not found in any other valve on the market. The HCV is highly adaptive to a variety of process applications from...Learn More